Edgewater Networks EdgeProtect 7300 Руководство по установке оборудования - Страница 5
Просмотреть онлайн или скачать pdf Руководство по установке оборудования для Сетевое оборудование Edgewater Networks EdgeProtect 7300. Edgewater Networks EdgeProtect 7300 18 страниц. Enterprise session border controller 7000 series
Также для Edgewater Networks EdgeProtect 7300: Руководство по аппаратному обеспечению (16 страниц)
Печатать страницуEdgeProtect 7300 Back Panel
Component
Erase Button
VGA Port
Port 6, Port 5,
Port 4
Port 3 -
Management
Interface
Port 2 - WAN
Interface
Port 1 - LAN
Interface
USB Ports
Serial Craft
Console Port
Input Power
Socket
ON/OFF Switch
© 2013 Edgewater Networks, Inc. All rights reserved.
Description
1 Click – No action
2 Clicks - Reset CLI and GUI password – no service interruption
3 Clicks - Restore to factory default and reboots the system
Currently not used
Currently not used
1 x 10/100/1000 Mbps RJ-45 Ethernet port for optional management network
connectivity. This interface must not be on the same network as the WAN or LAN
subnets. This network cannot be within a subnet contained in a "Route" statement
1 x 10/100/1000 Mbps RJ-45 Ethernet port for connectivity to the WAN or Internet
network connectivity - Default IP: none
1 x 10/100/1000 Mbps RJ-45 Ethernet port for LAN network connectivity. Default
IP: 192.168.1.1
Currently not used.
1 x RJ-45 serial craft console port for management. 9600-N-8-1 NONE for flow
control. An RJ-45 to DB9 console cable is included in the box with the
EdgeProtect 7300.
Accepts 3-pin shroud female plug for input power
System power on/off
5