ALTRAN RM09-43L Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для фотоаппаратов ALTRAN RM09-43L. ALTRAN RM09-43L 10 страниц.

OPERATION SETTING

The motor will run slowly at the first time to record the length of the track system. When the motor works for the second

time, it will come to normal speed.

If the motor has been already used in other tracks, the curtain may not stop at expected because some previous limit

information may be active. In this case, please refer to initial operation setting.

INITIAL OPERATION SETTING

Press at once the [Channel setting] on the back of the transmitter & [Stop] button for 4 seconds. After the motor has short

vibration, all setting of limits and intermediate points are deleted.

(Remark: the motor should be in available channel).

INTERMEDIATE STOP FUNCTION (IP)

This system allows 2 intermediate stop (P1 and IP2) by using the remote J.R113. For positions IP1 and IP2, 4 options

(setting, operation, cancellation and change) are available.

SET INTERMEDIATE

POINT STOP FUNCTION 1

SET INTERMEDIATE

POINT STOP FUNCTION 2

OPERATE INTERMEDIATE STOP FUNCTION 1

The curtain can stop at any

point

OPERATE INTERMEDIATE STOP FUNCION 2

The curtain can stop at any

point

ALTRAN SOLUTIONS SL

Ctra. Valencia-Ademuz, Km 21,9.

46181 · Benissanó · Valencia · SPAIN

Let the curtain stop at any point IP1

within the limit.

Let the curtain stop at any point IP2

within the limit

Press [Intermediate stop

point 1]

Press [Intermediate stop

point 2]

(Back face)

Press [Channel setting] and [Intermediate stop

1] to set IP1.

(Back face)

Press [Channel setting] and [Intermediate

stop 2] to set IP2.

The curtain will move to the IP1 point

The curtain will move to the IP2 point

Tel.: 00 34 96 113 61 53

Fax: 00 34 96 113 61 27