ClearWater Lights Darla Руководство по установке - Страница 9

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов ClearWater Lights Darla. ClearWater Lights Darla 16 страниц. Led light kit for bmw k1600gt
Также для ClearWater Lights Darla: Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц)

Step 4: Wiring

Wire Routing:

• Be sure to route wires so that they cannot become tangled or caught

in either a suspension part or steering part. Check movement of both

steering and suspension before riding the bike.

• It is sometimes helpful to follow existing wire routing.

• Use a Posi-lock to connect RED wire from the trident adapter to the thin

RED wire from the relay harness (2 wires).

• Use a Posi-twist to connect GREEN wire from the trident adapter to the

two GREEN wires from the lights (3 wires).

• Use a Posi-twist to connect BLACK wire from the harness relay to the

two BLACK wire from the lights (3 wires).

• Use a Posi-twist to connect RED wire from the harness relay to the two

RED in Glenda, WHITE in Darla wires from lights (3 wires).

• Plug the Trident Adapter into the Data Cable

• Run the RED and BLACK power wire, and Data Cable along the air

intake up to the battery. (Fig.1) and (Fig. 2)

• The BLACK power wire with the ring terminal goes to the negative ( - )

side of the battery. The RED power wire with the inline fuse holder goes

to the

positive ( + ) side of the battery.

Remove the fuse while wiring

the lights to prevent any accidental shorts.

• Plug the Data Cable into the CANopener.

Fig. 1

Fig. 2

Page 9