ClearWater Lights Glenda Руководство по установке - Страница 15

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов ClearWater Lights Glenda. ClearWater Lights Glenda 16 страниц. Led light kit for bmw k1600gt
Также для ClearWater Lights Glenda: Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц), Руководство по установке (12 страниц)

Clearwater CANopener operation and features

CLEARWATER BRAKE LIGHT MODULE (OPTIONAL)

A 1 AMP driver is provided for the optional Clearwater auxiliary brake light

license plate frame. There are four modes available. Toggle these modes

by pressing the brake lever or pedal five times while the bike is stationary.

The engine may be on or off. The brake lights will flash one, two, three or

four times to indicate the mode selected.

•

Mode 1 – off (default).

•

Mode 2 – functions identically to BMW brake light, no flash.

•

Mode 3 – California legal strobe on brake activation (4Hz flash), then

continuous on as long as the brake is held.

•

Mode 4 – speed sensitive mode. Bike speed and braking data is used

to modulate the flash rate.

NOTE:

The auxiliary brake light is configured as an "always on" running

light at a reduced light level. When either the front or rear brake is

activated, it activates at 100% brightness. All flashing light modes are

deactivated below 5mph.

AUXILIARY CANBUS RELAY DRIVES

•

Auxiliary turn on (1/4 amp maximum) Useful for turning on aux fuse

boxes or a PDM-60.

•

Auxiliary horn (1/4 amp maximum) Useful for adding and aux air horn.

MUST use relay.

•

Auxiliary high beam relay drive (1/4 amp maximum) Useful for adding

an aux high beam.

WARNING:

Do not connect auxiliary accessories without a relay!

FACTORY DEFAULT RESET

To reset the CANopener to the factory settings, hold the left turn signal

switch and press the flash-to-pass button six times within six seconds. All

factory preset dimmer levels and modes will be selected. A successful

reset is indicated by five flashes of the Clearwater lights.

Page 15