AltRider R118-P-1000 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Аксессуары для мотоциклов AltRider R118-P-1000. AltRider R118-P-1000 6 страниц. Crash bars for bmw r 1250 gs

Печатать страницу

Adventure Model: If you have BMW OEM crash bars installed remove these first.

AltRider Skid Plate: If you also purchased the AltRider skid plate, install the skid plate

first, reference skid plate instructions. If you already have AltRider skid plate installed

You may skip to step #3 NOTE: You may need to loosen the (2) OEM M10 bolts in step

2 that hold the AltRider Bracket.

Starting with the right side install the brackets with (2) OEM M10 Torx bolts

and apply thread locker. Get all fasteners started but do not tighten yet.

Repeat on the left side. See diagram above for reference. TIP: take your time

getting the frame aligned with holes in engine mounts. Note: If the holes are

not aligned have a helper try lifting the rear of the bike slightly to help.

BMW R 1250 GS

Crash Bars

Using a T50 driver remove the (2) OEM M10 lower engine mount

bolts on the left side.

With bike on center stand, remove OEM engine bolt using

18mm socket and T55 driver. Use a 1/4" extension to push the

bolt out far enough that you can grab it and remove by hand.

Save the nut for step 4.

Installation Instructions