dji E1200 Standart Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Дроны dji E1200 Standart. dji E1200 Standart 9 страниц.
Печатать страницу
Yellow, blinking slowly
—Solid Yellow
Red, blinking quickly
* Learn more about the possible errors by connecting the ESC to the ESC Assistant.
You can instantly tell what the unit's status is by observing the LEDs
and listening to the sounds emitted from the ESC.
9. Specifications
EN
Max. Thrust
Takeoff Weight (Recommended)
Takeoff Weight (Max.)
Battery (Recommended)
Working Temperature
ESC
Max. Allowable Voltage
Max. Allowable Current (Persistent)
PWM Input Signal Level
Signal Frequency
Battery
Weight (with cable)
Weight (without cable)
Motor
Stator Size
KV
Weight
Propeller
Diameter / Thread Pitch
10. FAQs
Remounting the Propellers
1) Use the two Foldable Propeller mounting screws (M3×12.5 hexagon),
the two Propeller Cover mounting screws (M3×8), and the four propeller
washers to remount the propellers.
2) First line up and apply thread locker into the thread of the propeller mount,
then tighten the screws until the propeller blades are securely clamped and
can rotate freely.
©
6
2015 DJI. All Rights Reserved.
B------B------B...
No signal input
Motors are rotating at full
None
throttle
Error, land your aircraft
None
immediately*
3900 g/rotor (25 V, Sea Level)
1200 ~ 1400 g/rotor (Sea Level)
1700 g/rotor (Sea Level)
6S LiPo
-10 ~ 60°C
26 V
40 A
3.3 V / 5 V Compatible
30 ~ 450 Hz
6S LiPo
72 g
35 g
42×16 mm
310 rpm/V
205 g
17×6 inch