Akku Power 7S3P Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Аксессуары для фотоаппаратов Akku Power 7S3P. Akku Power 7S3P 14 страниц. Li-ion dt2 battery, 25.2v / 9.0/5.0ah / 226.8/126wh, idex fire & safety
Также для Akku Power 7S3P: Инструкция по технике безопасности (12 страниц)
explosion may result.
• DO NOT short-circuit the battery pack. Make sure connections
do not contact metal objects, water, oil, jewelry, etc.
4. General precautions:
• Use battery packs only with IDEX Fire & Safety rescue tools
• Charge battery packs only with the specified IDEX Fire &
Safety battery chargers - Max. charge voltage: 29,0 V.
• Disconnect the battery charger from a vehicle while unattended
• To avoid overheating batteries, NEVER overcharge your device,
device, unplug when not in use.
• Maintain clean and open vent holes.
• DO NOT store or use the tool and battery pack in locations or
or vehicles where the temperature may reach or exceed 55°C
(131°F).
• Avoid explosive gases, open flames, direct sunlight or excessive
heat – risk of explosion.
• Children should be supervised to ensure that they do not play
with the appliance. This appliance can be used by children and
persons with reduced physical, sensory or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved.
• Cleaning and user maintenance shall not be made by children
without supervision.
• Persons who are not able to use the battery in a safe manner,
due to their physical, sensory or mental condition, or due to
their inexperience, must not use the battery charger without the
supervision or instruction from a skilled person.
• Strictly observe the minimum and the maximum charging
temperature. Contact with battery voltage may result in death
or serious injury.
• Make sure that during storage the battery pack is ideally
placed in a stable, and secured position that protects the pack
from unnecessary movements, avoiding contact with other
4
items or conductive materials, that may cause damages or
short circuits on the pack. If this is not guaranteed please
reconsider storing location of the battery pack or place the
battery in another position, that guarantees a stable and
secure position avoiding contact with other equipment and
therefore reducing the risk of any danger of physical damages
or short circuits on the pack.
• Make sure that while the battery is disconnected from the tool
or charger and carried by the tool operator that no conductive
conductive material such as, rings, bracelets, watches or remain-
ing liquids on the skin may come in contact with the positive and
negative pole on the pack, which may cause a short circuit and
burn signs on the skin or generate harmful electric shock for the
tool operator.
• Do not place the battery in aprons, pockets, tool boxes, product
kit boxes, drawers, etc...with loose nails, screws, keys, etc.
Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive
materials, such as keys, coins, hand tools, etc...
• When transporting individual batteries, make sure that the
battery terminals are protected and well insulated from materials
that could contact them and cause a short circuit.
Always adhere to these regulations and to the locally prevailing
safety regulations, and proceed very carefully.
Inform all people involved in the activities of the operation about
these safety regulations. This user manual can be provided in
electronical form and paper form and can be ordered at Akku
Power GmbH Batterien [email protected]
5. Disposing batteries
• When disposing the battery pack, always observe local and fe-
deral environmental regulations and/or the instructions manual.
Never throw batteries in the trash - improper usage or disposal of
lithium ion batteries can result in fires.