dji Inspire 1 Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Квадрокоптеры dji Inspire 1. dji Inspire 1 20 страниц.
Также для dji Inspire 1: Краткое руководство по эксплуатации (11 страниц), Краткое руководство по эксплуатации (10 страниц)

All manuals and user guides at all-guides.com

Step 4: Connect the mobile device to C1 USB port via micro‐USB cable.

4. Powering on C1

Press the power button once to check the current battery level. Press once and then press again and

hold for 2 seconds to power on the C1. (Repeat the above steps again to power off the C1)

Ready to Fly

1. Place the aircraft on flat ground in an open place with rear LED flight indicators facing you, and then

power on the C1 and aircraft.

2. Connect C1 and mobile device.

3. Launch DJI App, make sure the GPS mode has been selected.

4. Calibrating Compass

Always calibrate compass before your flight.

Step 1: Go into the App camera GUI and tap the

process, the rear LED flight indicator will be solid blue at this time.

Step 2: Hold aircraft horizontally then rotate 360° around the center axis until rear LED flight indicator

will be solid green.

Step 3: Hold aircraft vertically with nose pointing to the ground, rotate 360° around the center axis until

rear LED flight indicator will be blink purple. The process is completed.

If rear LED flight indicator is solid red, calibration has failed. Re‐calibrate by repeating step 1‐3.

5. Description of rear LED indicator

Blinking purple：GPS〉＝6 or hover assistant is functioning，it is safe for flight.

Blinking yellow: No GPS protection.

Blinking red: System error occurs.

* Refer to Appendix for more information.

6. Go into the camera GUI and tap check list, ensure everything is functioning normal.

button, select "calibrate compass" to start the