ARTHUR HOLM AHDTL Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Подъемные системы ARTHUR HOLM AHDTL. ARTHUR HOLM AHDTL 13 страниц. Universal motorized system for gooseneck microphones
Также для ARTHUR HOLM AHDTL: Руководство пользователя (20 страниц)

Печатать страницу

AHLINK

AHlink is used to control and configure the unit.

By default, the AHlink signal on the unit is deactivated. To activate the

AHlink signal, press during 2 seconds the Up/Down microphone button

located on the cover plate, or contact close GPI2 pin to GND during 2

seconds. When the AHlink signal is activated, 5 beeps will sound inside

the unit to indicate that the AHlink signal is active.

The unit automatically deactivates the AHlink signal if there is no device

(mobile or tablet) connected for more than 2 minutes. You can also

deactivate the AHlink signal using the APP on mobile or tablet. When

the AHlink signal is deactivated, a long beep sounds indicating that the

AHlink is not longer available on the unit.

To control and set up the unit using AHlink, download AHlink from the

App Store (IOS system) or from Google Play (Android system). The App

is free. Execute the AHlink on your mobile phone.

On the AHlink App options, it

is recommended to not select

Auto Connect and select Portrait

on Orientation. To connect to

the device, select Scan for local

devices.

AHLINK

When selecting the device, the

first page will upload. This page

is used to check the device

and for basic installation set up.

If the device does not appear

on the window, the AHlink signal

is not active. To activate, press

for 2 seconds the Up/Down

button located on cover plate,

or contact close to GND GPI

pin2 during 2 seconds. You will

hear 5 beeps indicating that the

AHlink signal is activated.

The AHlink name always begins

with AH characters and the

fourth last MAC AHlink address.

Select the device to control and

set up the unit.