AKKU SYS 9885154 Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для ИБП AKKU SYS 9885154. AKKU SYS 9885154 12 страниц. Extended battery pack 24v, 48v, 72v
Печатать страницу
User Manual
Extended Battery Pack 1kVA, 2kVA, 3kVA
To install the optional EBP(s) for a UPS
1. On the rear of the UPS, remove the cable retention clip covering the battery connector.
Retain the clip. See Figure 2.
2. Installations with one EBP only:
Remove the cable retention clip covering the right or upper battery connector.
Retain the clip.
3. Installations with more than one EBP:
For all EBPs except the last EBP, remove the cable retention clips covering both battery
connectors. Do not remove the clip from the second battery connector on the last EBP.
Retain the clips.
CAUTION:
A small amount of arcing may occur when connecting an EBP to the UPS.
This is normal and will not harm personnel. Insert the EBP cable into the UPS
battery connector quickly and firmly.
4. Plug the EBP cable(s) into the battery connector(s) as shown in Figure 2.
Up to four EBPs may be connected to the UPS.
5. Verify that the EBP connections are tight and adequate bend radius and strain relief
exist for each cable.
Remove cable retention clip
2kVA/3kVA
Tower UPS and EBPs
09/2021
Figure 2 – Connecting the EBPs:
Plugin EBP cable
Retain the clip
1KVA Tower UPS and EBPs
Page 7