FITKIT FT300M Руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Руководство пользователя для Беговая дорожка FITKIT FT300M. FITKIT FT300M 16 страниц.
Печатать страницу
Explosion-proof
protection:
E6
voltage or motor cause the
faulty of circuit that drive the
motor.
No safety key
E7
5. Routine Maintenance and Instructions
Warning: Before cleaning or maintaining products, please be sure the power plug of the
treadmill is pulled out.
Cleaning: Comprehensive cleaning will extend the using life of the electric treadmill.
Remove dust periodically in order to keep the parts clean. Be sure to clean running belt with both
sides of the exposed portion, which will reduce the accumulation of impurities. Make sure to wear
clean athletic shoes to avoid carrying the dirty matters into running board and belt. Treadmill belts
shall be cleaned by a damp cloth with soap. And please pay attention to avoid to wet the electrical
components and running belt.
Warning:
Make sure power plug disconnect before moving motor cover away, clean the motor at
least once a year.
Running belt specialized lubricant
This electric treadmill's running board and running belt has been lubricated in factory. Friction
between the running belt and running board has a great influence to the using life and the performance
of the electric treadmill, therefore regular applying of lubricant is needed. We advise you to check
the board regularly. If the board's surface is damaged, please contact our customer service center.
We advise using lubricant between running belt and running board with following schedule:
Lightweight user (use less than 3 hours a week) once per month;
Heavyweight use (use more than 7 hours a week) once every half month.
In order to better safeguard your electric treadmill and extend the life of the machine, it is
1.
recommended that after your continued use of two hours, turn off the machine and let it rest for 10
minutes before using again.
If the treadmill belt is too loose, there will be skid phenomenon's while running; if it's too tight, it
2.
may reduce motor performance and harden the abrasion of roller and the running belt. You can lift
two sides of the running belt for 50-75mm when the tightness is appropriate.
Running with adjusted alignment and tightness
In order to better use the treadmill and make the treadmill functions work better, it is necessary for
you to adjust the running belt into the best condition.
Running Belt alignment
⚫ Put electric treadmill flat on the ground.
⚫ Make the treadmill run at a speed of about 6-8km/hour.
⚫ If the running belt is closer to the right, rotate the right adjusting bolt with 1/2 turn clockwise,
impact
Possible Cause:
the
abnormal
Check if the power supply voltage is 50% lower than normal voltage
，use the correct voltage and test the machine again；check if the
controller has a burnt smell and replace the controller; Check if the
motor cable is connected and connect the motor wire again.
Put the safety key on the right place.
12