dji RONIN 2 Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для фотоаппаратов dji RONIN 2. dji RONIN 2 5 страниц. Counterweight set
Также для dji RONIN 2: Краткое руководство по эксплуатации (19 страниц), Руководство пользователя (6 страниц), Руководство пользователя (4 страниц), Руководство (4 страниц), Руководство пользователя (6 страниц)

Disclaimer and Warning

Congratulations on purchasing your new DJI OSMO

this document affects your safety and your legal rights and responsibilities. Read

this entire document carefully to ensure proper configuration before use. Failure to

read and follow instructions and warnings in this document may result in serious

injury to yourself or others, damage to your DJI OSMO product, or damage to other

objects in the vicinity. This document and all other collateral documents are subject

to change at the sole discretion of DJI OSMO.

By using this product, you hereby signify that you have read this disclaimer and

warning carefully and that you understand and agree to abide by the terms and

conditions herein. You agree that you are solely responsible for your own conduct

while using this product, and for any consequences thereof. You agree to use this

product only for purposes that are proper and in accordance with all applicable

laws, rules, and regulations, and all terms, precautions, practices, policies and

guidelines DJI OSMO has made and may make available.

DJI OSMO accepts no liability for damage, injury or any legal responsibility incurred

directly or indirectly from the use of this product. The user shall observe safe and

lawful practices including, but not limited to, those set forth in this document.

Notwithstanding above, your statutory rights under applicable national legislation

are not affected by this disclaimer.

OSMO is a trademark of SZ DJI OSMO TECHNOLOGY CO., LTD. (abbreviated as "DJI

OSMO") and its affiliated companies. Names of products, brands, etc., appearing

in this document are trademarks or registered trademarks of their respective owner

companies. This product and document are copyrighted by DJI OSMO with all rights

reserved. No part of this product or document shall be reproduced in any form without

prior written consent of or authorization from DJI OSMO.

Introduction

Mount the Top Accessory Mounting Plate and Camera Top Cross Bar to the top of the

camera to attach it to the RONIN

holes can be used to mount other accessories.

Usage

Mounting to a Blackmagic Camera

The included hot shoe plate should be used if using one of the following Blackmagic

cameras: Blackmagic Micro Cinema Camera, Blackmagic Pocket Cinema Camera 4K,

Blackmagic URSA Mini, and Blackmagic URSA Broadcast.

1. Slide the top accessory mounting plate into the hot shoe plate and adjust the position.

Then tighten the two screws in the middle part using a 3 mm hex key to secure the

mounting plate.

2 gimbal. The mounting plate's 1/4"-20 mounting

product. The information in