AIMS Power LiFePO4 LFP12V50B Руководство по эксплуатации - Страница 5
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Батарейный блок AIMS Power LiFePO4 LFP12V50B. AIMS Power LiFePO4 LFP12V50B 13 страниц.
CHARGING
Only use battery chargers made for
LiFePO
4 batteries. See battery specifications. Fire may occur if the correct
battery charger is not used.
Ensure the battery cables are tight, secure and have a good connection.
Follow instructions on battery charger.
Use Smart Battery Charger rated for
LiFePO
4.
MAINTAINING THE BATTERY
Battery should be inspected often.
Ensure cables and terminals are kept clean and free from corrosion, dirt, or build-up of any kind. Use dry cloth
to clean.
When possible keep batteries at a moderate temperature.
Dispose of batteries properly. Must be recycled.
Store battery at 50% SOC.
Charge and discharge according to battery specifications.
INSTALLATION
Do not reverse the polarity! The battery has safety protections, but damage may occur, and warranty
voided.
Check battery voltage before use. Make sure the battery voltage matches that of the battery charger and load.
Properly size your battery cables for your application.
Battery cables must be crimped or preferably, soldered, and crimped. Soldered connections alone are
not acceptable. High quality, UL-listed battery cables are recommended.
Battery terminal must be clean to reduce the resistance between the DC terminal and cable connection.
Do not connect the positive terminal and negative terminal of the battery to each other with any metal object (such
as wire).
Install in an environment with minimal heat. Warranty voided for terminal burnout due to excess heat and improper
maintenance.
Install in any orientation.
Battery terminal torque – 7.7 – 7.7 Nm
Use proper fusing.
The terminal lugs are in a separate bag within the box.
5