dji 1345s Краткое руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Аксессуары для дронов и квадрокоптеров dji 1345s. dji 1345s 10 страниц. Propellers for the inspire 1
Печатать страницу
3. Ensure that the mounting plate and securing spring
are firmly attached to the motor before every flight.
4. Propellers should never be used after they have
been involved in a crash or collision. If such an event
occurs, replace the propellers before flying again.
5. The propellers, securing springs, and mounting
plates have an approximate lifespan of 200
flights. Inspect them regularly to determine if they
should be replaced sooner.
6. Always follow the prescribed storage procedures
to avoid damaging the propellers.
Installation
Assembly requires a M3×5.5 compatible wrench.
Follow the steps below to install the 1345s Quick-
Release Propellers on the Inspire 1.
1. Align the holes of the securing springs and the
mounting plates (with a white dot) with the holes
on the motors with gray axes. Insert the M3×5.5
screws and tighten to secure. Be sure that the
securing spring is facing upward, as shown below.
White dot
2. Align the holes of the securing springs and the
mounting plates (without a white dot) with the holes
on the motors with black axes. Insert the M3×5.5
screws and tighten to secure. Be sure that the
securing spring is facing upward, as shown below.
Without white dot
2
Grey axes
Black axes