dji Zenmuse X5 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Цифровая камера dji Zenmuse X5. dji Zenmuse X5 18 страниц. For inspire 1 pro
Также для dji Zenmuse X5: Руководство пользователя (17 страниц), Руководство пользователя (11 страниц), Руководство пользователя (18 страниц), Руководство (11 страниц)

ZENMUSE X5 User Manual

The Balancing Ring must be installed on the camera lens when a filter is not used.

Supported Micro SD Cards

The Zenmuse X5 comes with a 16GB Micro SD card, but also supports Micro SD cards with a

capacity of up to 64GB. We recommend using a UHS-1 Micro SD card to minimize the delay

when reading and writing high resolution video data.

DO NOT remove the Micro SD card from the Zenmuse X5 when it is powered on.

The following steps use the DJI MFT 15mm f/1.7 ASPH as illustration of how to mount the

camera lens to the camera body. Be sure to power off the battery before installation.

1. Remove the camera body cap.

2. While holding down the Lens Release Button, rotate the Lens Lock clockwise to unlock it.

3. Remove the lens cap and rear cap.

4. Align the two Lens Mount Indexes on the camera body and camera lens, and insert the

camera lens into the body of the camera.

5. Rotate the camera lens clockwise until you hear a click.

6. Rotate the Lens Lock counterclockwise to lock it.

7. Mount the Balancing Ring (or a filter) and the Lens Hood.

8. Insert the Micro SD card.

Lens Release Button

Micro-SD

Balancing Ring (or Filter)

Lens Hood