Fitness Technology 400S+ Руководство - Страница 3

Просмотреть онлайн или скачать pdf Руководство для Оборудование для фитнеса Fitness Technology 400S+. Fitness Technology 400S+ 10 страниц. Performance force plate

Печатать страницу

Specifications.

FORCE PLATE 400 Kg Capacity

Capacity:

1000Kg Rated Force

Safety Factor: Side-load rejection ratio 500:1

Safe side-load 100 % of R.C. Maximum safe central overload 150 % of R.C.

Ultimate central overload 300 % of R.C.

Physical Size: 795mm x 795mm x 60mm

Materials:

Carbon Fibre Platform with non-slip Top.

Load Cells complete with adjustable height feet assemblies that can adjust the height of the

Plate to approx 120mm

Sample Rate: Maximum Sampling Rate of 1000Hz on all channels via BMS version 2 (BMSv2) software

program.

Integration:

400S+ Performance Force Plate + BMS Linear Position Transducer (LPT) is calibrated by

users on site via the BMSv2 software via Tools\Configure\Calibration (tab window)

Unique:

Only Performance Force Plate on the market with a footprint size large enough for every

users' Centre of Mass (COM) to remain over this force plate for all testing functions for

accurate data collection all the time. It is also capable of running the BMS LPT & auto

saving all data files + outputting to Excel via the BMS software. It also measures uni-lateral &

bilateral R & L leg anterior / posterior & medio / lateral force - all done on this single 400S+

force plate!

Only Performance Force Plate on the market capable of running on our new InnerBalance

software tracking used to measure & record all anterior-posterior & mediolateral sway

movements.

Weight:

400S+, 14.5 Kg (32 lbs)

Operation:

Integral PCB Module operates 4 Load Cells + Output powered via 5 V DC Computer USB

Port only. Sensor type Steel Shear Beams rating 250Kg @ 3mV/V that are genuinely rated

to sample @ 1000Hz. Simply install the software onto your Hard Drive and then connect the

USB Cable plug into your Computer. The 400S requires no other power supply or charging

of batteries is required.

PCB monitors: Sensors # 1 – 4 each have a Load cell cable connector 5 terminal plug (Molex) (four in total

as shown on pages 3&4) sensors # 1&2, 3&4 may share a Load cell cable connector 10

terminal plug (Molex) (two in total as shown on page 14). These connect to 4 Load cells.

(see page 6).

Outputs:

Communicates via 1 x USB 2.0 Cable that does not rely on Bluetooth or other wireless

connection to the laptop, so has NO internal batteries - annoying flat battery and recharging

issues are irrelevant!

Power:

Computer USB supplies 100% of power supply to operate the 400S from any PC or laptop

USB Port. 1

Cables:

1 x USB 2.0 Extension Cable 3 M Long provided with all 400S units. This mean zero

external RF interference.

Connections: 1 x RJ 45 Connection (located under the Force Plate) with connection lead supplied going to

1K Ohm Potentiometer on the BMS LPT Model PT5A-150-V62-UP-1K-M6-632676A this

LPT is an optional plug-in connection – only used if barbell tracking data is also required to

be tracked simultaneously with the ground reaction force data (See pages 4 & 5).

Fitness Technology, 21 Bishop Street, Skye SA 5072 Australia

Postal Address: PO Box 139 Fullarton 5063 Tel: +61 8 8331 9229

FORCE PLATE 1000 Kg

Capacity

www.fittech.com.au E [email protected]

Mob: 0418 815 400.