Articona 833158 Руководство пользователя

Просмотреть онлайн или скачать pdf Руководство пользователя для Медиаконвертер Articona 833158. Articona 833158 3 страницы. 10/100/1000base-t to 1000base-x standalone
Также для Articona 833158: Руководство пользователя (3 страниц)

Печатать страницу

Trademarks

Contents subject to revision without prior notice. All

trademarks remain the property of their owners.

This publication may not be reproduced as a whole or

in part, in any way whatsoever unless prior consent

has been obtained from the owner.

FCC Warning

This Media Converter has been tested and found to

comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These

standards are designed to provide reasonable

protection against harmful interference when this

device is operated in a commercial environment. This

device generates, uses, and can radiate radio

frequency

energy

and

may

interference to radio communications unless installed

in accordance with this User's Guide. Operation of

this device in a residential area is likely to cause

harmful interference which will make the user

responsible for the appropriate remedial action at his

/ her own expense.

CE Mark Warning

This is a Class A product. In a domestic environment

this product may cause radio interference in which

case the user will need to consider adequate

preventative methods.

1. Checklist

The package should contain the following items:

- The Media Converter

- AC-DC Power Adapter

- User's Guide

Please notify your sales representative immediately if

any item is missing or damaged.

2. Overview

This Media Converter is designed to meet the

massive needs for Gigabit network deployment and

able to extend a copper based Gigabit network via

fiber cable.

802.3u, 802.3ab and 802.3z standards. It can be

installed into a 16-Slot Universal Media Converter

Rack. The installation and operation procedures are

simple and straightforward. Operation status can be

locally monitored through a set of Diagnostic LED

cause

harmful

indicators located in the front panel.

Major Features:

- TP and Fiber Auto-Negotiation

- MDI/MDIX Auto-Crossover

- Flow Control and Back Pressure

- 9K bytes Jumbo Frame

- Store and Forward switching mechanism

- 1K MAC address

- Link Alarm

- 100/1000Mbps dual rate fiber uplink

It is fully compliant with IEEE802.3,

3. Installation

- Attach fiber cable from the Media Converter to the

fiber network. The fiber connections must be

matched – transmit socket to receive socket.

- Attach a UTP cable from the 10/100/1000BASE-T

network to the RJ-45 port on the Media Converter.

- Connect the power adapter to the Media Converter

and check that the Power LED lights up. The TX

Link/Act and F/O Link/Act LEDs will light up when

all the cable connections are satisfactory.

Fig 1. Front Panel of the Media Converter

Fig 2. Rear Panel of the Media Converter