Cleco Tools CellCore P2402KA Руководство по быстрой установке - Страница 13
Просмотреть онлайн или скачать pdf Руководство по быстрой установке для Контроллер Cleco Tools CellCore P2402KA. Cleco Tools CellCore P2402KA 16 страниц. Data transmission
Печатать страницу
Abb. 3-6: Bluetooth AP Configuration
The Bluetooth AP Configuration tab contains the following setting options:
Parameter
Activate Bluetooth Com-
munication
Name
Set default Name
Start pairing...
Reset pairing...
Information to setup cli-
ents for bluetooth
<Identify>
<Apply>
<OK>
<Cancel>
Apex Tool Group
Description
If the check box is activated, Bluetooth is active on the controller.
→ The WLAN function is deactivated.
Enter the name used to display the control on the tool.
If the Set default Name check box is activated, a default value is assigned to
the name.
Press to make the controller visible to the tool for a Bluetooth connection.
→ The following message indicates whether the operation was suc-
cessful.
Press to disconnect the Bluetooth connection between the controller and
the tool.
→ The following message indicates whether the operation was suc-
cessful.
Information about possible IP addresses for tools. To establish a Bluetooth
connection, the IP address of the tool must be in the specified range.
Update the view of the WLAN settings.
Save the settings.
Exit software, the settings are saved.
Exit software, the settings are not saved.
P2402KA | 2019-05
Setting up the mPro200GC-AP
13
3
EN