djm direct 01985-V2 Оригинальное руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Пила djm direct 01985-V2. djm direct 01985-V2 17 страниц.
Печатать страницу1.Introduction
MANUFACTURER:
DJM Direct.com
Unit 43 Churchill Way,
Lomeshaye Industrial Estate,
Nelson, Lancashire BB9 6RT UK
DEAR CUSTOMER
We hope your new tool brings you much enjoyment and success.
NOTE:
According to the applicable product liability laws, the manufacturer
of the device does not assume liability for damages to the product or
damages caused by the product that occurs due to:
Improper handling,
●
Non-compliance of the operating instructions,
●
Repairs by third parties, not by authorized service technicians,
●
Installation and replacement of non-original spare parts, .
●
Application other than specified,
●
WE RECOMMEND:
Read through the complete text in the operating instructions before
installing and commissioning the device. The operating instructions
are intended to help the user to become familiar with the machine
and take advantage of its application possibilities in accordance with
the recommendations. The operating instructions contain important
information on how to operate the machine safely, professionally
and economically, how to avoid danger, costly repairs, reduce
downtimes and how to increase reliability and service life of the
machine. In addition to the safety regulations in the operating
instructions, you have to meet the applicable regulations that apply
for the operation of the machine in your country. Keep the operating
instructions package with the machine at all times and store it in a
plastic cover to protect it from dirt and moisture. Read the
instruction manual each time before operating the machine and
carefully follow its information. The machine can only be operated by
persons who are instructed concerning the operation of the machine
and who are informed about the associated dangers. The minimum
age requirement must be complied with. In addition to the safety
requirements in these operating instructions and your country's
applicable regulations, you should observe the generally recognized
technical rules concerning the operation of machines.
2.Device Description
1. Saw table
2. Table insert
3. Saw blade
4. Blade guard
5. Suction hose
6. Riving knife
7. Mitre gauge
8. Table extension
9. Push stick
10. Under frame
11. On-Off switch
12. Reset button for motor
overload cut out
13. Blade height hand wheel
14. Blade tilt lock knob
15. Guide rail
16. Rip fence
17. Legs
17a. Rubber feet
17b.Leg support stay
18.Long cross brace
19.Short cross brace
20.Hexagon head screw
21.Hexagon nut
22a.Saw blade spanner
22b.Saw blade spanner
23.Support struts
24. Extension table support rod
1