djm direct DJMBD13-40 Оригинальное руководство по эксплуатации - Страница 7

Просмотреть онлайн или скачать pdf Оригинальное руководство по эксплуатации для Сверло djm direct DJMBD13-40. djm direct DJMBD13-40 19 страниц. Bench drill

Печатать страницу

7. Assembly & Installation

This drill press was partially assembled at the

factory. To assemble your machine follow the below

instructions.

Column Tube

Place the column tube on the baseplate. Bolt the

column tube to the baseplate with the three screws

M8×20 supplied. Tighten the screws moderately

tight with an open end wrench SW 13 (not scope of

delivery) so that the threads in the baseplate do not

strip.

Drilling Bench

Place the drilling bench holder on the column tube.

Push the drilling bench holder into a lower position.

Fix the drilling bench holder with the locking handle in

the required position.

Machine Head

Place the machine head on the column tube and

secure the machine head with the two grub screws to

the side with the allen key 4 mm.

Drill Chuck Guard

Put the drill chuck guard on the upper part of the

drill spindle. Secure the drill chuck guard with a

screwdriver (not scope of delivery).