Artillery EVNOVO SW-X1 Руководство по установке
Просмотреть онлайн или скачать pdf Руководство по установке для 3D-принтеры Artillery EVNOVO SW-X1. Artillery EVNOVO SW-X1 2 страницы.
EVNOVO 3D Printer
SW-X1
Step 2
Fix the spool holder to the top of the printer, adjust
the width to fit the size of your filament spool.
Make
sure the filament sensor is facing
forward.
Front
List 1
Step 3
Connect the filament runout sensor as shown in
pictures below:
List 2
M4x45 (5pcs)
Step 4
Fix the Z Endstop to the frame as shown in pictures
below.
The distance between the sensor top and base
top should be approx 75mm.
75mm
Step 1
Fix the XZ gantry to the base with 4pcs of M4x45
screws as shown in picture。
M4x45 (4pcs)
Step 5
Connect the Z Stepper Motors as shown in picture
belows: