djpower DSK 2000 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование djpower DSK 2000. djpower DSK 2000 10 страниц.

10. When the heating process is completed and ready to fog, the status of wireless function and fluid

sensor can be seen on the display of the LCD screen as follows:

When the wireless function is on, LCD displays "Ready To Fog W" (W means wireless)

When the fluid sensor is on, LCD displays "Ready To Fog S" (S means sensor)

When the above two features are both on, LCD displays "Ready To Fog WS"

When the above two features are both off, LCD displays "Ready To Fog"

4.2.2. Use of the remote

1. All receivers can receive signals from any registered transmitters.

2. Each receiver can record 5 transmitters at most.

3. The included transmitter has been registered before shipment. User can use it directly without

setting any more. The initial setting is conducted by pressing button "locking" and it can be stopped by

pressing "unlock" button.

4. If users want to use other 4.Transmitters( except the included one) to control the machine, the

setting must be completed within 15s after switching on the machine, because 15s later, it will leave

"transmitter setting mode" automatically.

Setting example 1.

If users want to use other 3 transmitters, press button A of each transmitter for 1s rapidly within the

above mentioned 15s when the machine is turned on and LCD (Liquid Crystal Display) screen shows

"wireless Setup" to complete registration.

Please note that after switching on the machine for 15s and the LCD screen shows "wireless setup

ok", user cannot add any transmitters to the receiver because at this time, the machine has already

left "transmitter setting mode"

Setting example2

If users want to use 1 transmitter to control 2 or even more machines, they have to turn on the

machines at the same time, and press the button "locking" of the transmitter for 1s within the 15s when

the LCD screens on the machines show" wireless setup" (this procedure is the same to registering one

machine)

5. If not any new transmitters are registered when the machine is switched on, the memory of the

receiver will remain the record of last operation.

6. Please note if a new transmitter is registered when machine is switched on, no matter how many

new transmitters are registered(max 5), all records of previous registered transmitters will be cleared.

7 / 10