djpower H-S6 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование djpower H-S6. djpower H-S6 16 страниц.

INSTALLATION SETTING

4.1.1

AC Power supply

H-S6 has a fixed voltage power supply, which can be used according to the specific model AC

220 V-240 V, 50/60 Hz.

To determine the power requirements of the machine (circuit breaker, power outlet and

wiring), please refer to the values listed on the machine panel label, or refer to the machine

specification data. The listed values represent the average current consumption of the

machine under normal conditions.

Always connect the machine to a protected circuit (circuit breaker or fuse). Make

sure that the machine is connected to a grounded power plug to avoid electric

shock or fire.

Never connect the machine to a rheostat (variable resistor) or dimmer circuit, even if

the rheostat or dimmer channel is only used as a 0 or 100% switch.

4.1.2

Reset the overload protector

This machine is equipped with resettable overload protector. If the overload protector trips,

the machine will be disconnected from the power source.

•

Disconnect the machine from the power source.

•

Wait 15 minutes for the machine to cool down.

•

After 15 minutes, press the button of the overload protector to reset it.

Plug the machine back into the power outlet and continue to use it as recommended.

•

4.1.3

Installation Notes

•

Use mounting brackets or hanging clamps to mount the nozzle.

•

Confirm that the installation site, fixed joints and slings can support more than 10 times the

weight of the nozzle.

•

Make sure there are no flammable materials around.

•

When installing the nozzle, be sure to use a safety rope that can support more than 10

times the weight of the nozzle.

•

Please install the nozzle in a well-ventilated place.

Gross weight

Flight case dimensions

Packing dimensions

593 × 552 × 622 mm

655 × 610 × 665 mm

38.2 kg