djpower V-3 Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для DJ оборудование djpower V-3. djpower V-3 20 страниц. Spark machine

SETUP

4.1

The machine has a fixed voltage power supply and can work with an input voltage of AC 220 V-240 V,

50/60 Hz, depending on the specific model.

To determine the product's power requirements (circuit breaker, power outlet, and wiring), use the

current value listed on the label affixed to the product's back panel, or refer to the product's

specifications chart. The listed current rating indicates the product's average current draw under normal

conditions.

Always connect the product to a protected circuit (circuit breaker or fuse). Make sure the

product has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect the product to a rheostat (variable resistor) or dimmer circuit, even if the

rheostat or dimmer channel serves only as a 0 to 100% switch.

4.2

The Spark Machine V-3 comes with a power input cord terminated with a Seetronic Powerkon connector

on one end and an EU plug on the other end (EU & China market). If the power input cord that came with

your product has no plug, or if you need the change the plug, use the table below to wire the new plug:

Connection

AC Live

AC Neutral

AC Ground

4.3

You can link the V-3 to a DMX controller using a 3- or 5-pin DMX connection. If using other DMX-

compatible products with this product, you can control each individually with a single DMX controller.

Instructions for connecting and configuring this product for DMX operation are in the User Manual.

DJPOWER

Wire (U.S.)

Black

White

Green/Yellow

Wire (Europe)

Brown

Blue

Green/Yellow