djpower H-6 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Туманная машина djpower H-6. djpower H-6 8 страниц. Pro fog machine

H-6 PRO FOG MACHINE

There are two buttons on the remote: ON/OFF.

One unit can remember five different programming. This enables each unit to be

controlled separately when being used together.

1.1

When the unit is powered on, and the wireless status is ON, the LCD display will

show "wireless setup". In such case, user can register the wireless remote by

pressing any button for 1s on the remote. If the LCD display flickers twice, then it

is matched with the unit successfully. One unit can match with 5 different

programming remotes at most. If user register the sixth one, then the memory for

the first one will be erased.

If the unit has matched with 5 remotes, when powered off. It will remember those

remotes, while if user tries to register another one, then the memory for the five

remotes will be erased.

For example:

① If one unit needs to be registered with three remotes, during 15s after the

machine is powered on, press buttons on the three remotes to register them.

Make sure the LCD display flickers twice.

②If two units need to be controlled by one remoter. Power on both machine, and

press button on the remote. Make sure both units' LCD display flicker twice.

1.2

Wireless remote control

Press ON button to run the unit or OFF button to stop it.

When the machine is under wireless remote control, the haze output is the one

set by VOLUME OUT. For example, if the VOLUME OUT is 1%, then it will be 1%

when controlled by wireless remote.

Note:

1. When register the wireless remote, please make sure the LCD display flicker

twice. Then release the ON button. Otherwise, it might fail.

2. If the wireless remote is under OFF status, when the machine is powered on

again. The LCD display will not show "wireless setup"

3. Wireless remote control will void if the unit is connected to DMX.

LCD Control

LCD display has Chinese and English for alternative to cater to different

customers' demands.

Please take note LCD control is void when the unit is connected to DMX.

LCD display has 4 buttons., see below: