DK2 Everest R-3 Руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Снегоуборщик DK2 Everest R-3. DK2 Everest R-3 16 страниц. Snow plow

IMPORTANT SAFE OPERATING PRACTICES

2. Make it a practice to completely lower the blade to the ground every time the

vehicle is parked. A raised blade may drop unexpectedly and this can result in

serious personal injury.

WARNING! When mounting or removing the Snow Plow, keep hands and feet

clear of the blade, mounting assembly and winch. Moving or falling assemblies

CAUTION: Transport speed should never exceed 70 km/h (45 mph). Adverse

travel conditions may dictate a further speed reduction. Must use appropriate

driving lights

3. Wear a seat belt when plowing snow. Hidden obstacles could make the vehicle

stop suddenly, resulting in personal injury.

4. Put the vehicle in park or into gear and remove the ignition key to prevent

others from starting the vehicle when installing or servicing the plow.

5. Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing,

and gloves away from moving parts. Loose clothes, jewellery or long hair can

as you get warmer.

6. Wear safety goggles when working under the hood of the vehicle. for eye

protection from battery acid, gasoline, dirt and dust. Everyday eyeglasses have

only impact resistance lenses. They are not safety glasses.

7. For work connected with the vehicle , avoid touching any hot surfaces such as

the engine, radiator, hoses and exhaust pipes.

9. Do not plow snow with your head out the window. Sudden stops or protruding

obstacles could result in personal injury.

10. The driver only should be in the vehicle when plowing snow.

SNOW PLOW

1. Maintain the Snow Plow and keep it clean and lubricated. This applies even

the unit and apply corrosion-resistant paint to any areas that show corrosion to

prevent further damage. If stored outside, cover the winch assembly.

2. Carefully inspect your Snow Plow before every use. Particularly check the

alignment of moving parts and tighten any loose screws and bolts.

3. This unit is not intended for commercial use.

WARNING! Carefully inspect all Snow Plow components and bolts for

looseness, wear and damage when mounting or removing the unit and before

transporting it.

4. With heavier full-sized vehicles, mainly through momentum, it may be easier to

damage the plow assembly. Cautious use will help extend your years of trouble-

free service.

5. Do not attempt plowing snow at speeds above 15 km/h

(10 mph). Driving at speeds above 15 km/h (10 mph) with the plow attached

reduces the cool air intake and may cause your vehicle engine to overheat.

6. Do not overload the vehicle. Take into account the loaded vehicle weight,

including the entire Snow Plow assembly, all accessories, driver and passenger,

En.4

DK2 Everest R-3 man.