DK2 Power OPC504 Руководство по сборке - Страница 13

Просмотреть онлайн или скачать pdf Руководство по сборке для Чиппер DK2 Power OPC504. DK2 Power OPC504 14 страниц. 4 and 6 inch commercial chipper

OPERATION – BEFORE TURNING KEY AND PULL STARTING ENGINE

CLEAR AREA OF ALL PEOPLE AND PROPERTY THAT COULD BE DAMAGED.

THINK SAFETY. CHIPS ARE FLYING PROJECTILES AND CAN CAUSE INJURY.

CHECK BOTH CHUTES AND MAKE SURE THEY ARE CLOSED AND LOCKED.

WEAR SAFETY GLASSES, HEARING PROTECTION, AND GLOVES

DO NOT WEAR LOOSE FITTING CLOTHES THAT COULD GET STUCK IN THE

CHIPPER

ONLY CHIP WOOD, NO METAL OR PLASTIC.

CHILDREN SHOULD NOT RUN THIS EQUIPMENT

STAY ALERT OF YOUR SURROUNDING AND PERSONS THAT COULD APEAR IN

THE CHIP PATH WHILE YOU ARE WORKING.

FEED LARGE DIA TREES SLOWLY INTO THE CUTTING DRUM ALLOWING THE

DRUM TO REGAIN RPM AND CUTTING SPEED BETWEEN CUTS.

RUN ALL CONTENTS IN THE HOPPER THROUGH THE MACHINE BEFORE

SHUTTING ENGINE OFF TO PREVENT LOOSE WOOD FROM LOGING

BETWEEN BLADES JAMMING DRUM BEFORE YOUR NEXT ENGINE START UP.

REMOVE SMALL SIDE COVER WITH 2 NUTS AND TURN DRUM

COUNTERCLOCKWISE TO FREE UP WOOD STUCK IN THE BLADE.

NEVER RUN CHIPPER WITH CHUTES OPEN. RUNNING A MACHINE WITH

CHUTES OPEN CAN CAUSE INJURY OR DEATH.

READ AND OBEY ALL WARNING LABELS ON THIS MACHINE.

TOW THE MACHINE 25 MPH MAX.