Artistic Licence netLynx quad Руководство пользователя - Страница 4
Просмотреть онлайн или скачать pdf Руководство пользователя для Шлюз Artistic Licence netLynx quad. Artistic Licence netLynx quad 12 страниц.
Печатать страницу
Product Overview
netLynx quad is a desktop or truss-mounted
bidirectional gateway. It converts 4 universes
of Art-Net (supports all versions up to Art-Net
4) or sACN ethernet into DMX512/RDM. The
product also supports DMX to Art-Net/sACN
conversion.
netLynx quad is configurable via its internal
web-browser or by using DMX-Workshop
(free-of-charge software available from Artistic
Licence). DHCP is supported for automatic IP
addressing.
netLynx quad offers high levels of electrical
protection. All outputs are protected against
mains electrocution (international voltages
including UK 3-phase) and are self-healing.
A handy factory reset switch enables the
default settings to be restored - simply hold
down and cycle the power. Alternatively, a
single press of this button sends a 'squawk'
message over the network to the console. This
enables the gateway to be easily physically
located.
Summary of Key Features
10/100BaseT
y
Art-Net, sACN, RDNnet LLRP compatible
y
4 bidirectional DMX512 ports, compatible
y
with all variants of DMX, including
DMX512-A.
RDM (E1.20 - 2010) compatible
y
Power, Ethernet and DMX port LEDs
y
Factory reset and Squawk button
y
PoE compatible (IEEE 802.3af - 2003)
y
Configurable using internal web-browser
y
or DMX-Workshop
DHCP supported, default IP 2.x.y.z
y
All outputs protected against continuous
y
connection to 425 VAC (self-healing)
Failsafe mode
y
RDM Integrity supported
y
Surface or truss mount
y
netLynx quad User Guide
Power
netLynx quad can be powered from either an
external PSU (12-48 VDC) or with PoE. The
latter requires a suitable ethernet switch for
the power source, such as Art-Switch PoE4.
Please note that the product should be
powered via EITHER the DC power input or
ethernet PoE, but not both (there is no option
to failover from one power source to the other
if both are connected).
Ethernet Connection
netLynx quad has an RJ45 ethernet connector
and supports Art-Net 4 and sACN (ESTA
E1.31). netLynx quad requires Cat 5 cable or
better and supports 10BaseT and 100BaseT.
DMX Outputs
netLynx quad can output a maximum of four
Universes of DMX512 data. There are 4 DMX/
RDM output ports with XLR5 connectors.
The DMX512-A standard specifies that Cat5
cable can be used to carry DMX data. The
table below shows which cores should be
used. It is recommended that Cat5E cable is
used. RDM data uses the same connections
as the DMX512 data.
All outputs are electrocution protected against
continuous connection to 425 VAC.
Failsafe mode
Failsafe mode allows the user to define what
the DMX outputs will do in the event that
network data or connectivity is lost. Failsafe
mode triggers after loss of either network data
for 7 seconds or loss of ethernet link.
The options are:
Do nothing, i.e. hold last state (products
y
with serial nos. up to 163 work this way)
Output all channels at zero
y
Output all channels at full
y
Output a recorded failsafe scene
y
Failsafe mode is configured using our free
DMX-Workshop software. Failsafe mode also
operates at boot up, so if the gateways power
on and there is no controller, they will execute
failsafe.
Page 4