Artistic Licence Rail-Split RDM Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Кабели и разъемы Artistic Licence Rail-Split RDM. Artistic Licence Rail-Split RDM 8 страниц.

Печатать страницу
DMX512 Wiring
XLR Pin (Convention)
Overview
Rail-Split RDM is a fully bi-directional DMX512 splitter and distribution amplifier, with the added
feature of a 'data fixer' for DMX. The latter functionality is used for resolving flickering problems
arising from product incompatibility issues - see 'Fixer Mode' on page 6 for more information.
Key features
Input Optical Isolation
y
Six independent outputs
y
Bi-directional outputs
y
Electrocution protection: Input, Loop and
y
all outputs protected against continuous
connection to 425 VAC (self-healing)
RDM (Remote Device Management
y
Draft & Standard V1.0)
DMX512-A compatible
y
Microprocessor controlled
y
Surface mount or DIN rail mounted
y
DMX-Fix mode to handle compatibility
y
issues
Rail-Split RDM User Guide
1
2
3
Function
Ground
Data -
Data +
Connections
Input
The DMX512 input is attached via three screw
terminals. Please refer to the connections
diagram.
Loop-Through
A passive loop-through connection allows
onward connection to other DMX512 devices.
If this feature is not required then the signal
must be terminated. The product contains an
internal termination resistor. This is enabled by
fitting a wire link between the screw terminals
that will terminate the DMX line (Term and
DAT+).
Output
Six DMX512 outputs are provided. Each output
is capable of driving 32 additional DMX512
devices. It is not necessary to terminate any
outputs that are not connected. However, a
terminator must be connected to the final
DMX512 device.
Colour
Black
Blue
Red
Page 4