Customatic SQUIRE Руководство пользователя - Страница 9

Просмотреть онлайн или скачать pdf Руководство пользователя для Внутренняя отделка Customatic SQUIRE. Customatic SQUIRE 16 страниц. Adjustable bed frame

Печатать страницу
Assembling the headboard bracket (optional)
IMPORTANT!
•
Failure to follow the installation steps as they appear in this guide could result in damage to
your adjustable bed frame.
•
For safety reasons, lifting of the adjustable bed frame must always be performed by two (2)
people; and the unit should always be on a flat surface.
•
Make sure to position the bottom of the headboard cross member no more than
3 inches (76.2 mm) between the headboard and the top of the mattress.
1
Using the remote control, raise the head section of the bed
frame to its full height.
2
Locate the first round panel under the head section of the
bed. The second round panel is for the bed leg.
3
Position the inner headboard bracket underneath the first
round panel. The bracket opening should be facedown
under the bar.
4
Insert a retainer bolt fitted with a washer into the slot under
the inner headboard bracket and through the round panel.
Tighten the bolt using the Allen key wrench.
5
Place the open side of the outer headboard bracket onto
the exposed square tube of the inner headboard bracket to
create a tight fit.
6
Insert a retainer bolt fitted with a washer through the outer
headboard bracket and into the inner headboard bracket.
Tighten the bolt with an Allen key wrench. Leave loose
enough for adjusting.
7
Repeat steps 2 to 6 to install the brackets on the other side of
the head section of the bed frame.
8
When the headboard brackets are assembled, make sure
there is a space of 1.5 inches (38.1 mm) to 2 inches (50.8
mm) between the edge of the bed frame and the headboard
brackets.
9
Securely fasten the headboard bolts (not included with your
parts box) to the end of the headboard bracket assembly.
10
If you need to adjust the headboard brackets, unscrew
the bolts holding the outer headboard bracket and move
them the necessary distance. Reinstall the bolts and tighten
securely.
Place your mattress on the adjustable bed frame surface.
Your adjustable bed and headboard installation is now complete.
Installation Guide
9