CustomWorks Dominator Модель - Страница 2

Просмотреть онлайн или скачать pdf Модель для Игрушечный автомобиль с мотором CustomWorks Dominator. CustomWorks Dominator 17 страниц. 1:10 scale 4wd dirt oval car kit

Печатать страницу

REQUIRED READING... ... ... ... ...

REQUIRED READING

Thank You and Congratulations on purchasing the DOMINATOR

winning car with over 25 years worth of CUSTOM WORKS

this race car's winning potential it is important to follow the written text along with the pictures included.

The steps required to build this car are very easy, as long as you read before you build.

The instructional format for building this car is to open each bag in alphabetical order. Each bag of

parts will be broken down into "Steps" thru the manual. All parts and hardware needed to complete

all steps for each separate bag, will be found in each individual bag. There is no need to steal screws

from other bags. In the rare event you need to look in a different bag for a certain part, it will be

noted clearly in the instructions.

Considering the various dirt or clay surfaces that Dirt Oval cars are raced on today, the Dominator has

been designed to be competitive on a wide array of dirt surfaces using the CustomWorks "Street-Trac"

style tires that come with the kit. The instructions will build the kit using the most verastale set-up Custom

Works has found in testing on different types of tracks, however there are various other suspension

configurations available to you that you may find more suitable for your local track. For updates and more

proven set-ups login to CustomWorksRC.com.

All hardware (screws, washers, nuts, etc...) are referred to by size and type in the instructions. To help

clarify which screw or nut the instructions are calling for refer to the parts call-out accompanying each step.

The size of the screw or nut should match the "shadow" of the same piece very closely.

Screw ID's are: FH

FH=Flat Head BH

BUILDING TIPS:

-Using some type of thread locking fluid is suggested for all parts where metal screws thread into other metal

parts. We suggest using a lite setting strength thread lock for the reason you may want to take the screw out

one day. Remember it only takes a very small amount to secure the screw.

-Composite plastic parts are designed to fit and may be tighter than desired when brand new. It should be

known that these parts will free up with racing the car fairly quickly. Also these parts have great strength and

durability, however the shock resistance is reduced greatly when operating in cold climates.

-Do NOT

NOT use power screwdrivers to drive screws into parts. The fast rotation speed can easily melt and strip

NOT

plastic parts or cross-thread into the aluminum parts.

-Lightly sand the edges of graphite pieces using a medium grade sandpaper to avoid splinters. Run a

thin bead of Super Glue around the edges to give pieces greater durability.

400 Grit Sandpaper

Hobby Scissors

Small Needle Nose Pliers

UNDERSTAND THIS MANUAL!

DOMINATOR

DOMINATOR! Within this kit you will find a race

CUSTOM WORKS

CUSTOM WORKS design and quality. In order for you to realize

CUSTOM WORKS

BH=Button Head SH

SH=Socket Head SS

SUGGESTED TOOLS

Wire Cutters

X-Acto Knife

Phillips Head Screw Driver

SS SS=Set Screw

SS SS

Blue Loctite

3/16" Wrench

CA Glue