CustomWorks INTIMIDATOR GSX2 Руководство - Страница 15

Просмотреть онлайн или скачать pdf Руководство для Игрушечный автомобиль с мотором CustomWorks INTIMIDATOR GSX2. CustomWorks INTIMIDATOR GSX2 17 страниц. Racing kit

Печатать страницу
Rear Toe Stagger:
Rear Toe Stagger: Difference in the amount of Rear Toe-In among the rear tires. Typically used
Rear Toe Stagger:
Rear Toe Stagger:
Rear Toe Stagger:
only on high bite tracks with MORE toe-in on the Left Rear tire than the Right so the rear of
the car helps turn the car LEFT under acceleration.
Wheelbase (Front End):
Wheelbase (Front End): Wheelbase is the distance between the front and rear axles.
Wheelbase (Front End):
Wheelbase (Front End):
Wheelbase (Front End):
Running the entire front end assembly in the forward position makes the wheelbase longer
and therefore more stable on long/fast tracks with flowing turns. Running the entire front
end assembly in the rear position make the wheelbase shorter and therefore more suitable for
short-tracks where you are constantly turning.
Wheelbase (Rear End):
Wheelbase (Rear End):
Wheelbase (Rear End):
Wheelbase (Rear End): This adjustment uses the plastic spacers on the kingpin the rear
Wheelbase (Rear End):
bearing carrier rides on. With the spacers in front of the carrier it will lengthen the wheelbase
but will increase steering. If the spacers are behind the carrier it will shorten the wheelbase
but increase rear traction. This is completely backwards from how it works for the Front End
only because in the rear of the car you have the weight of the motor and the torque it creates.
Shortening the wheelbase here makes more of the car hang over the rear tires and promotes
more weight transfer.
Final Drive Chart:
Final Drive Chart:
Final Drive Chart:
Final Drive Chart: The chart provided below gives you the final drive of the motor to spin the
Final Drive Chart:
axle 1 revolution. This chart is NOT just the pinion and spur, but has the transmission ratio
included as well.
To determine the final drive in your car:
1) Divide the Spur Gear by the Pinion Gear, which equals a "Ratio".
2) Multiply the "Ratio" by the "Transmission Ratio", which will equal
your "Final Drive".