Artos F502-4-1 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Сантехника Artos F502-4-1. Artos F502-4-1 7 страниц. Floor mount tub filler

2. Install rough-in a minimum of 2", maximum of 3" below

finished floor surface. If installing onto a wood sub-floor, install a

wood support between the joists that is minimum 2" thick by 6"

wide (2"x6" pre-cut lumber is not sufficient).

NOTE: the rough-in can be placed at any orientation as the plate

that attaches the tub filler to the rough-in is adjustable.

Finished

floor

surface

3. Ensure that the rough-in is level by u sing the bubble on the

plug as reference and secure the rough-in to the floor.

4. Connect the water supply. Hot and cold inlets are clearly

marked, ensure that hoses are connected correctly.

5. Turn on water supply and check for any leaks.

6. Install finished floor, cut off any excess plastic from the rough-

in so that it is flush with finished floor surface.

50230411

INSTALLATION STEPS

Blocking

Joist