Cutting Edge Products Cross DVR Инструкции - Страница 2

Просмотреть онлайн или скачать pdf Инструкции для DVR Cutting Edge Products Cross DVR. Cutting Edge Products Cross DVR 2 страницы.

Video Recording

Make sure the Mode Switch is pushed to the right (V) to enable video

recording. Press the Power Button for a second. The Indicator Light will

glow yellow; when the Indicator Light turns blue, the unit is recording.

Press the Power Button again for a second and the Indicator Light will turn

yellow, indicating recording has stopped.

Recording can not be resumed until the unit has finished storing the

previous video. It takes a few moments to store files; do not attempt further

operations until files have been stored.

When videos are recorded consecutively, the system may store them as one

video file.

NOTE: If the battery is low, the system will store the video and power off

automatically.

Taking Photos

Make sure the Mode Switch is pushed to the left (P) to enable

picture-taking.

Short press the Power Button to take a picture. The Yellow light will flash to

indicate a photo has been taken and stored.

NOTE: If the DVRCS is left idle for a minute, it will power off automatically.

Changing Modes

In video mode, push the Mode Switch left to P to enter photo-taking mode.

In photo-taking mode, push the Mode Switch right to V to enter

video-recording mode and start recording.

When shifting from video mode to photo mode, the system will store the

last recorded video before entering photo-taking mode.

Video Playback

Make sure the DVR is powered off. Using the included USB cable,

connect DVR with PC or laptop.

Open removable disc and click chosen video file to play.

If the computer doesn't recognize the removable disk at first, try to

reconnect.

Before ejecting the DVR, please check to make sure it is ready to eject.

When possible, use the Eject command before unplugging the device.

Power off

To turn the Spy Cross DVR off, long press the Power Button until the

indicator light goes out. The unit is now powered off. In video mode, the

DVSCR saves the video file before powering down.

Charging

Connect the unit to PC or laptop using the USB cable. If the battery is

low, the Indicator Light glows yellow. When the Indicator Light turns

blue, the unit is fully charged. We recommend turning the unit off while

charging.

For the first few charges, we recommend fully discharging the batteries

before charging; this will optimize the battery's capacity and running

time.