ARTRAY ARTCAM-KAI-USB3 Series Буклет с инструкциями - Страница 15

Просмотреть онлайн или скачать pdf Буклет с инструкциями для Камера безопасности ARTRAY ARTCAM-KAI-USB3 Series. ARTRAY ARTCAM-KAI-USB3 Series 15 страниц. Usb3.0 ccd camera

Печатать страницу

8. System Requirements

8-1 Recommended System Requirements
●Intel chip set, Southbridge above ICH6
●CPU: Intel Core2duo 2.4GHz or higher
●Memory: Above 512MB
●OS: Windows XP or above
8-2 Minimum System Requirements
●USB3.0 Enhanced Host Controller
●CPU: Intel Pentium4 1.7GHz or higher
●Memory: Above 256MB
●OS: Windows XP or above
Caution
■Please refer the restrictions below when you use ARTCAM.
(1)Recommended System requirements
If the system specifications are below the recommended requirements, it is possible that the camera may not reach the
maximum speed.
(2) Use of other USB3.0 hardware
The data on our camera/converter is transferred in bulk mode. For this reason, when using our camera/converter,
please avoid using other bulk transferred USB3.0 hardware such as Memory stick, External HDD, External DVD,
CDROM and etc.
As a solution, we recommend to install a PCI USB host card to the PC and connect external USB hardware to this port
only.
(3) USB3.0 cable Extension
We cannot guarantee the functionality of the USB3 camera if the user adopts USB3.0 extension cables or repeaters
which are not confirmed by us. With the extension cables or repeaters, the bandwidth of transfer may differ, and thus
caused malfunctions such as a low frame rate or recognition failure on the camera.
What may cause the problem is that the regulation of the power lines becomes not enough, and so causes impudence
mismatch on data signals.
*For the recommended extension cable, please contact our sales department. (TEL: +81-3-3389-5488)
ARTRAY CO., LTD.
1-17-5 Kouenjikita, Suginami-ku, Tokyo 166-0002 Japan
Tel : +81-3-3389-5488
TUV 100 01 0310
- 15 -
Fax : +81-3-3389-5486
URL : www.artray. us