DLC OMNI CONTROL Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Контроллер DLC OMNI CONTROL. DLC OMNI CONTROL 3 страницы. Touch led controller for mirrors

Печатать страницу

WIRING:

Determine your system components, including a power adapter, as well as LED lighting. Omni Control works for both 12 VDC (max 40 W) or 24 VDC

(max 80 W) systems.

Use only UL certified power adapters with the power output that coordinates with your input voltage.

Wiring With Plug-In Power Adapters:

Ask your DLC representative for wires with a DC

jack. Use a plug-in adapter to connect the Omni

Control system to your power source and LED

lighting.

Wiring With Hardwire Power Adapters:

Turn off power to your system at the main

breaker

Connect input to power source

Connect output to LED lighting

Check connections and turn on power at

the main breaker

CARE & HANDLING

•

Diagrams are examples only. Be sure to consult specification and installation guides for all components in your system. Always ensure you

are complying with NEC and local regulations

•

Avoid voltage drop by keeping cords from the power adapter as short as possible (standard is 10' at 20 AWG). If the product must be

installed far from the power adapter (beyond 20'), cut off the DC plug and use a large gauge ( >16 AWG) cord to avoid a voltage drop

CALIBRATION:

Onmi Control is self-calibrating upon start up. To calibrate or reset calibration, unplug Omni Control from the power source and then plug it back in.

CARE & HANDLING

•

If Onmi Control is not responding to touch, reset calibration by disconnecting the unit from the power source and plugging it back in

DLC is not responsible for any injuries or damages caused by improper installation. Contact a DLC representative for more information.

Output:

12 VDC / 24 VDC

WW (Warm White)

CW (Cool White)

Input:

WWW.DLC-LUMISHEET.COM

DC jack