DLD technology Revolution Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Стереосистема DLD technology Revolution. DLD technology Revolution 7 страниц.

USAGE INSTRUCTIONS – REAR PANEL

SPEAKER POSITION

The Angle and Distance CV inputs allow you to offset the position of the speaker.

When these CV inputs are used, a second ghost speaker will appear on the front

screen. This ghost is the actual position of the speaker used in the 3D calculations.

When you use the mouse to move the speaker, you are moving the brighter

reference speaker. The ghost speaker will always use the CV inputs as an offset

from the reference.

The Elev CV input will offset the elevation of the audio source.

The Shift Perpendicular CV input will move the audio source perpendicular to its current position. If the

speaker is currently at 0°, then this input will move the speaker left and right. This input is very useful for

creating 'fly by' Doppler effects. Again the calculated position is shown using the ghost speaker on the front

display.

CV OUT

The Angle CV output gives a control signal that represents the current angle of the speaker. One use for this is

to pass this signal into the Angle input of a second Revolution device, and then apply an offset using the Angle

knob on the front panel.

The Distance CV outputs the calculated distance from the listener.

Of course these CV outputs can be used to control many devices in Reason, and you can then use the front

display as a unique control surface.

PRE-3D

The Pre-3D audio outputs the delayed and attenuated audio before the 3D effect is applied. This is useful for

when multiple Revolution devices are chained to make audio appear to bounce around 3D space. See the

included Crazy Echo combinator patch for an example of this.

AUDIO IN

The Left and Right inputs are for your source audio. If a stereo signal is used, it will be mixed down to mono

before the 3D effect is applied.

AUDIO OUT