Alva AOH202-11 Краткое руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Нагреватель Alva AOH202-11. Alva AOH202-11 13 страниц. Oil heater

Place the radiator body upside-down on a scratch-free

surface, make sure it is stable and will not fall.

Screw off the wing nuts from the U-shaped bolt provided,

attach the U-shaped bolt to the U-facing

flange between first and second fins (near the front cover).

To attach the castor mounting plate to the radiator body, you

should insert the threaded ends of the U-bolt in the holes on the

castor mounting plate.

Screw the wing nuts back to the U bolt and fasten the wing nut

properly.

Note: do not over tighten, which may cause the damage to the

radiator flange.

Screw off spherical nut from the castor, align the shaft to the hole

of the castor mounting plate, insert, and screw on the spherical

nut.

Repeat 2, 3, 4 and 5 on the rear of radiator for mounting of the

rear castors.

Note: the rear castors must be mounted between the end two fins.

OPERATION OF THE

HEATER

NOTE: It is normal when

the heater is switched on

for the first time or when it

is turned on after having not

been used for a long period

of time, the heaters may

emit some smell and fumes.

This will disappear when the

heater has been on for a

short while.

Before using the heater,

make sure you understand

the "IMPORTANT SAFETY

INFORMATION"

section of this manual.