Alva GFP101 Руководство - Страница 6

Просмотреть онлайн или скачать pdf Руководство для Нагреватель Alva GFP101. Alva GFP101 13 страниц. Log heater

Печатать страницу
1.
body
2.
Burner tube
3.
control knob
4.
Igniter button
5.
Inlet connection
6.
Pilot flame
7.
Flame failure device
4
1.
Before removing this log heater from the packaging, read this manual
in full and make sure that it is what you want/need.
2.
Remove the heater from its packaging.
3.
Ensure the ceramic logs are not broken
4.
The heater must be placed on a level, solid, non-flammable surface.
If necessary, it can be fastened to the floor through the 4 mounting
holes in the base (mounting screws are not supplied).
5.
The bullnose regulator goes directly into the cylinder valve. Always
make sure the regulator is pushed fully to the bottom of the cylinder
valve before tightening. The use of an adapter is illegal.
6.
This heater must be installed by a regsitered SAQCC installer and
7.
in accordance with the requirements of SANS 10087-1.
8.
Screw the regulator into the cylinder valve. DO NOT use a tool to
tighten the regulator, it is to be hand tightened only.
9.
A SANS 1156 hose is to be used. Connect the hose to the regulator
and the log heater inlet connection. This hose must be secured to
both the regulator and the log heater with hose clamps.
10. Perform the leak test as indicated on page 3. DO NOT try to ignite the
log heater when performing this leak test.
11. If no leaks are detected, place the ceramic logs on the heater as
indicated below:

PARTS VIEW

7
6
1

HEATER SET UP

3
2
5
3
Before using the heater,
make sure you understand
the "IMPORTANT SAFETY
INFORMATION"
section of this manual.
Take note:
On first lighting a new
cylinder or connecting a
cylinder after it has been
refilled; you may have to
depress the control valve for
a longer period of time.
Never attempt to remove the
Regulator if the heater is on
or if the cylinder valve is not
properly closed.
Before using the heater,
make sure you understand
the "IMPORTANT SAFETY
INFORMATION"
section of this manual.