Alvarado MSTX Инструкции по модернизации - Страница 3

Просмотреть онлайн или скачать pdf Инструкции по модернизации для ИБП Alvarado MSTX. Alvarado MSTX 5 страниц. Battery backup

9. Place battery and the battery backup mounting plate into top channel so that the battery is in

between the battery guides of the battery backup mounting plate. Reference drawing

MA113295 items #1 & #11.

10. Attach battery backup mounting plate assembly to top channel using the same mounting holes

as the MST control board mounting plate that was removed.

11. Attach battery harness wires to battery backup board at BAT terminals as per wiring diagram

WD108360.

12. Attach transformer wires to battery backup board at AC terminals as per wiring diagram

WD108360.

13. Attach MST control board to battery backup mounting plate as per drawing MA113295 Item #2.

14. Attach power harness from battery backup board at DC to MST control board at connection J4

per drawing WD108360. NOTE: If battery has enough power, the MST control board will power

up immediately.

15. Attach main power wires to transformer/J-box assembly. NOTE: Verify that the power toggle

switch is in the OFF position prior to returning main power.

16. When the power toggle switch is put into the ON position the battery backup control board will

give an audible click and the power LED will light up.

12660 Colony Street, Chino CA 91710 – Phone: +1.909.591.8431 – Fax: +1.909.628.1403 – Email: [email protected]

MSTX Battery Backup Retrofit Kit FSD3337R1-0

ALVARADO

Page 3