ALVEO3D PrintBOX-440 Руководство по эксплуатации - Страница 12

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для 3D-принтеры ALVEO3D PrintBOX-440. ALVEO3D PrintBOX-440 20 страниц.

STEP 8 . OPTION V2

The filtering system can be controlled by the V2 board provided pre-assembled.

It is necessary to have the high-pressure ALHP2425-H8 fan to run the board V2.

https://www.alveo3d.com/en/product/high-pressure-fan/

If you order the board V2 and the high-pressure H8 fan independently of the

enclosure 3D printer - BOX (PrintBOX). It is necessary to replace the provided

fan ALHP2425-H6 provided with the PrintBOX by the fan ALHP2425-H8 (keep

the label towards the filter).

Unscrew the black

countersunk screw M3 and

gently pull the AlveoV0

cover to take it off.

Plug the wire to the board

AlveoV0, then replace the

cover back, let the wire go

through the small opening,

do not pinch it when

tightening the screw.