AKO UST 74 Руководство по сборке и эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по сборке и эксплуатации для Нагреватель AKO UST 74. AKO UST 74 16 страниц. Radiator for the terrace / stand radiator

Печатать страницу

• The device is only suitable for use in or around the house, like for instance in the balcony area, patio or

garden.

• Never use the device near a bath tub, shower, wash basin or swimming pool (see fig. 6).

• Keep a distance of 50 cm to all combustible objects (see. fig. 5). The appliance must not be covered

up, otherwise this could lead to over-heating which could result in a fire. Never use inflammable cleaning

agents, like petrol, for cleaning the appliance. Do not use the appliance in rooms where combustible gas-

es can be present.

• Only operate the device in a fully assembled condition in a standing position with the upper part of the

housing horizontally placed. (see fig. 4). Otherwise the housing temperature can increase to a danger-

ous level which can lead to danger from burning.

• During operation and for a little while afterwards the device is hot in the area of the protection grid. Do

not transport it in this condition.

• Never use the device with switching installations such as timers which switch the device on auto-

matically. It may be possible that you have unintentionally moved the device or covered it, thus causing

it to be a fire hazard.

• Check whether the voltage on the type label agrees with the voltage supply in your home.

• The appliance may not be operated by children.

• Make sure that no water or other fluids can enter into the appliance.

• Unplug the appliance before cleaning.

• Never use inflammable cleaning agents, like petrol, for cleaning the appliance.

• Occasionally check the power cable for damage. A damaged cable can cause dangerous electric

shocks. In case of damage, the cable must be replaced. This should only be done by an expert, as a

special tool is necessary.

• The appliance may only be opened up and repaired by qualified personnel.

Technical specifications

Type

Nominal voltage

Power

Switching levels

Protection class

Enclosure rating

Approx. dimensions

Approx. weight

Your Infra-red heater warms the object or person without directly heating up the surrounding air. It con-

tains two heating elements each rated at 700W. The heating power can be set to either 700W (one heating

element) or 1400W (both heating elements) via a rotary switch.

Assembly parts (see diagrams on page 2)

2 stand feet

2 screws

Support

Housing

Protection grid

Unpacking the device

- Remove the packaging material and the transport security mechanism which protects the heating ele-

ments.

- Check the appliance for visible damage.

If you should notice any damage, do not use the appliance. Please contact your dealer immediately.

- Please dispose of the packaging in an environmentally manner.

Assembling the device (see figs. 1,2 and 3)

(You require an 8mm standard screw driver and a size 2 cross-head screw driver).

Lay the device on an even soft surface. Fasten both stand feet with

support

. Stand the device up. Swing the housing

arrow A). Lock the housing by screwing in the locking screw

The following safety instructions should be observed

Technical specifications may change without prior notice

UST 74

230V~

1400 W

AUS / 700 W / 1400 W

IP 23

75 cm x 70 cm x 32 cm

5.5 kg

2 heating elements

Locking screw

Rotary switch

Power supply cable

Mains plug

until it snaps into the horizontal position (see

completely.

with the screws

into the