DLS FlexxPump 500 Руководство пользователя - Страница 11

Просмотреть онлайн или скачать pdf Руководство пользователя для Водяной насос DLS FlexxPump 500. DLS FlexxPump 500 11 страниц.

FlexxPump 500 DLS

Continuation sheet

9.2

Oil-refill

Revision: 0

1. Remove the housing from the power unit

of the FlexxPump 500 DLS.

 Separate the housing from the power unit

by turning the retaining ring counterclock-

wise.

 Make sure that no dirt, water or foreign

bodies enters the lubricant inlet.

 As Alternative you can remove the lid on

top of the housing,drehe to lay open the oil

reservoir. Turn the lid to OPEN and pull it

off.

2. Filling of the cartridge with oil

Fill the cartridge with oil until the mark

"max. Füllstand" is reached.

 Make sure you fill the cartridge neat, that

no dirt, water or foreign bodies enters the

lubricant inlet.

3. Assembling the housing on the power unit

of the FlexxPump 500 DLS.

 Place the dismantled housing on the

FlexxPump 500achte and press it onto the

power unit.

 Fasten the housing to the power unit by

turning the retaining ring clockwise.

 The retaining ring must snap into place

when turning and be completely tightened.

 Mount the lid back onto the housing, if

you removed it for filling the oil cartridge.

The lid has to be in the position CLOSE.

D L S

SCHMIERSYSTEME

D I R E C T

L U B R I C A T I O N

S Y S T E M S

EN-