Blue Angel ESU80 Инструкция по эксплуатации и руководство по запчастям
Просмотреть онлайн или скачать pdf Инструкция по эксплуатации и руководство по запчастям для Водяной насос Blue Angel ESU80. Blue Angel ESU80 4 страницы. Submersible utility pump
Печатать страницуDescription
This portable, submersible utility pump
is designed for non-automatic use in
water. The units are equipped with a
grounding type power cord. The
motor is oil filled and sealed for cooler
operation. The discharge fitting is
designed for convenient attachment to
a garden hose.
IMPORTANT: THIS PUMP IS NOT
SUITABLE FOR AQUATIC LIFE!
Unpacking
After unpacking the unit, carefully
inspect for any damage that may have
occurred during transit. Check for
loose, missing or damaged parts.
Very Important Safety
Information
an imminently hazardous situation
which, if not avoided, WILL result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, COULD result in
death or serious injury.
a potentially hazardous situation
which, if not avoided, MAY result in
minor or moderate injury.
important information, that if not fol-
lowed, MAY cause damage to equip-
ment.
This manual contains information that
is very important to know and under-
stand. This information is provided for
SAFETY and to PREVENT EQUIPMENT
PROBLEMS. To help recognize this
information, observe the following:
1. Read these rules and instruc-
tions carefully. Failure to fol-
low these instructions could
cause serious bodily injury
and/or property damage.
REMINDER: Keep your dated proof of purchase for warranty purposes! Attach it to this manual or file it for safekeeping.
© 2007 Blue Angel™ Pumps
Operating Instructions and Parts Manual
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or
maintain the product described. Protect yourself and others by observing all safety information. Failure to
comply with instructions could result in personal injury and/or property damage! Retain instructions for future
reference.
Submersible Utility Pump
Do not pump flammable or
explosive fluids such as gaso-
line, fuel oil, kerosene, etc. Do not use
in a flammable and/or explosive envi-
ronment. Pump only clear water.
Personal injury and/or property dam-
age will result.
Risk of electric shock! This
pump has not been tested for
use in swimming pool areas. Never
place pump in pools while people are
in the water.
Do not handle pump with wet
hands or when standing in
water or on a damp surface.
Risk of electric shock! This
pump is supplied with a
Danger
grounding conductor and grounding
indicates
type attachment plug. Use a grounded
receptacle to reduce the risk of fatal
electrical shock.
Warning
indicates
contains dielectric motor oil for motor
heat transfer. Care should be taken
when disposing of this oil. Do not use
this pump in ponds or fountains
because the motor oil can be harmful
Caution
to aquatic life.
indicates
2. Wear safety glasses at all
times when working with
pumps.
Notice
indicates
3. It is strongly recommended that
this unit be plugged into a Ground
Fault Circuit Interrupter (GFCI).
Consult a local electrician for instal-
lation and availability.
4. Do not use the power cord or dis-
charge hose to carry or handle the
pump. Damage to the power cord
or discharge hose may occur. Use
the lifting ring supplied on the
pump.
For parts, product & service information
visit www.blueangelpumps.com
Installation and
Operation
Always disconnect electric
supply before attempting to
install, service, relocate or per-
form any maintenance. If the
power source is out of sight,
lock and TAG IN OPEN (OFF)
POSITION to prevent unexpected power
application. Failure to do so could
result in fatal electrical shock!
This unit is not designed for
use in septic tanks or under-
ground vaults to pump raw sewage or
effluents. Never use in hazardous or
explosive locations.
1. This pump has been designed to
attach to a standard garden hose.
Thread the female end of the gar-
den hose to the male discharge on
the pump.
2. To reduce leakage between the
pump and the hose, place a hose
This
washer (not included) on the gar-
pump
den hose before installing to the
pump.
3. For best pump performance,
unwind the hose before starting the
pump. This will help remove any
kinks or binds in the hose and allow
the unit to pump with less
restriction.
4. Set the pump on a hard surface in
the water. Do not set the pump
directly on mud or sand surfaces.
This will cause the inlet screen to
clog.
5. The water level must be at least 1/2
inch for the pump to operate.
Water levels less than 1/2 inch will
not allow the impeller to contact
water and no water will be
pumped.
ESU80, ESU82
351301-002 1/07