Blue Clean 7850 Руководство по эксплуатации и техническому обслуживанию - Страница 3
Просмотреть онлайн или скачать pdf Руководство по эксплуатации и техническому обслуживанию для Пылесос Blue Clean 7850. Blue Clean 7850 20 страниц.
Печатать страницу- 1. Table of Contents
- 2. Machine Identification
- 3. Technical Features
- 4. Main Parts
- 5. Safety Regulations
- 6. Machine Installation
- 7. Machine Start up
- 8. Regulation of the Operating Pressure
- 9. Hydraulic System
- 10. Labels
- 11. Maintenance
- 12. Maintenance
- 13. Cooling Coil Internal Cleaning
- 14. Warranty
- 15. Declaration of Conformity
- 16. Declaration of Conformity
AR BLUE CLEAN
7830 - 7850 - 7870
The machine has been designed to clean or wash, with hot or cold water, objects or
surfaces which can stand the mechanical treatment of the water jet under high
pressure and by the action of the chemicals products (detergents).
Before starting, be sure that it is supplied with the relevant identification rating plate;
otherwise you must contact your dealer immediately and don't use the machine (see
fig. 1). Never leave an operating cleaner unattended in the work place.
After a working day we suggest to place the machine in a dry place and protected
from the bad whether conditions.
The machine must be used only for the purposes for which it has been
designed.
Never use the machine if the safety conditions are uncertain.
In case of demolition, please follow the law in force in your Country.
2.
MACHINE IDENTIFICATION
Fig. 1 below indicates where the identification plate is fixed.
A = WORKING PRESSURE
B = MAX PRESSURE
C = FLOW RATE
D = WATER MAX TEMPERATURE - INPUT
E = BURNER POWER
F = ABSORBED POWER
G = VOLT/HZ
H = FUEL TYPE
I = FUEL TANK CAPACITY
L = SERIAL NUMBER
M = PROTECTION DEGREE
N = NOISE VALUE
O = PRODUCT CODE
The data on the plate must not be erased for any reason.
USE AND MAINTENANCE HANDBOOK
page 3