Aion Electronics CERULEAN Руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Музыкальное оборудование Aion Electronics CERULEAN. Aion Electronics CERULEAN 10 страниц. Amp overdrive
TABLE OF CONTENTS
1 Project Overview
2 Introduction & Usage
INTRODUCTION
The Cerulean Amp Overdrive is an updated version of the Marshall Bluesbreaker pedal, originally
released in 1991. In 1995, Marshall moved production from England to Korea, and around this time they
made some tweaks to the circuit, increasing the gain and reducing the bass. It was discontinued in 1999
to make way for the Bluesbreaker II, a redesign that is universally seen as inferior to the originals.
The Bluesbreaker is the source circuit for a number of expensive boutique pedals including the
Analogman King of Tone, which is two Bluesbreakers in the same box with a few modifications. The
Cerulean project borrows the expanded clipping options from the King of Tone, allowing you to select
either soft clipping (stock), hard clipping, or no clipping (boost mode).
We have also added an internal DIP switch to select between three different gain range settings.
Normally to increase the gain range of an overdrive, you'd just raise the value of the drive pot. However,
the Bluesbreaker has a unique dual-stage gain control setup such that increasing the potentiometer
value will also lower the minimum gain along with raising the maximum gain, so this method is not very
useful. But by adding resistance to just the first stage, we can shift the overall gain range higher and get
a lot more tones than the original pedal was capable of.
The third addition is a toggle switch to go between the pre-95 (V1) and post-95 (V2) versions. It's not a
drastic difference, but there's enough lore surrounding the two versions that we thought it'd be worth
including this as a setting.
The Cerulean V2 is a complete overhaul of the original Cerulean, which combined features from the
JHS Morning Glory as well as the Presence trimmer from the King of Tone. The first version is no longer
available, but the
legacy 1590B version
King of Tone is available as the
USAGE
The Bluesbreaker has the same control layout as most overdrive or distortion effects:
• Tone controls the treble response of the effect.
• Drive controls the amount of gain in the op-amp feedback diode clipping stage.
• Volume controls the overall output.
• Clipping (toggle switch) lets you choose between soft clipping (stock), hard clipping, or no clipping.
• Mode (toggle switch) changes between the V1 and V2 Bluesbreaker circuits.
CERULEAN AMP OVERDRIVE
of the project is largely the same and will remain stocked. The
Theseus
and the Prince of Tone is available as the Achilles.
10 Licensing
2