Dobinsons BU59-3661 Руководство по установке - Страница 4

Просмотреть онлайн или скачать pdf Руководство по установке для Автомобильные аксессуары Dobinsons BU59-3661. Dobinsons BU59-3661 10 страниц. Bullbar

Fitting Guide

1. Remove the number plate and remove the

grill.

2. Remove the clips along the top of the

bumper, the bolts along the edge of the wheel

arch and lower section of the bumper

attaching the bumper to the vehicle.

3. Carefully unclip the bumper from the edges

and under the headlights and carefully

remove.

4. With the bumper off you can now remove the

steel bumper mount and steel crush cans.

Dobinsons Springs and Suspension

If removing the original bullbar some models

require the bullbar to be removed first, then

there are also bolts in the centre of the bullbar

mounting crush cans that need to be removed

as well before removing the original crush

cans.

5. From inside the chassis rails loosely install the

U-bolts supplied (item 3) facing out as seen on

page 3.

6. Loosely install the small mounting brackets

(item 2) to the outside of the chassis as per

diagram on page 3.

7. Install the bullbar mounting bracket (item 1).

Washers can be placed between the top and

bottom bolts between items 1 and 2 to take

up the gap as per the picture below. Ensure

though that when tightening the bracket

tights correctly and the washers do not sit

behind between the chassis and mounts.