Dobinsons MRR Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Пульт дистанционного управления Dobinsons MRR. Dobinsons MRR 8 страниц. Adjustable remote reservoir shock absorbers

Печатать страницу

High Speed Compression ( ( ( ( HSC

High Speed Compression

The high speed adjustment is increased by turning the larger adjustment dial on the reservoir

clockwise and is decreased by turning it anti-clockwise and has approximately 10 clicks. NOTE:

Turning the dial clockwise will screw the adjustment assembly outward as it is a left-hand

thread, this is normal. You can use the tool provided but do NOT apply a lot of pressure towards

the end of the adjustment range as it may result in component damage. High speed primarily

affects the compression damping during high speed shaft movements such as harsh or square

edge bumps and harsh vehicle landings. Lower settings will provide a slightly smoother ride but

will be more prone to bottoming out, whilst higher settings will result in a firmer less compliant

ride but reduce bottoming. It is recommended to choose a setting that is as low as possible

whilst minimizing bottoming. If you are unable to achieve a firm enough setting you can

increase the low speed adjustment to suit and if you are unable to achieve a soft enough setting

then you may reduce the low speed adjustment. See the graphs below for a sweep of the low

speed compression adjustments. Low speed compression set at midpoint.

HSC

HSC) ) ) )

HSC

Page 3 of 8