Dock Edge PostLite DE96258F Руководство

Просмотреть онлайн или скачать pdf Руководство для Ландшафтное освещение Dock Edge PostLite DE96258F. Dock Edge PostLite DE96258F 2 страницы.

Печатать страницу

DE96258F

Mounting Instructions:

If your PostLite™ is loose on the post, wrap tape

(electrical or duct) around the post until the

PostLite™ has a snug fit on the post. Secure the

PostLite™ to the post with a set screw.

3-1/4" ID Posts

Remove top cap of the post.

Clean the inside edges of the post.

Apply glue if necessary to the inside of the

post or drill a hole for a set screw through the

post. Use an appropriate screw to act as a set

screw through the post and into the side of

the PostLite™ base. Any one of the adaptors

provided with your PostLite™ may be used for

installation in this size of post.

CHANGING LED ILLUMINATION COLOR:

There is no need to replace LED's with the PostLite to

change colors. Remove the threaded solar cap and flip

the current color switch to the "OFF" position. Flip the

appropriate switch to the "ON" position as per the chart

to illuminate the desired color LED.

Note: Only one (1) color should be in the "ON" position at

any given time. More than one color in the "ON" position

may result in product failure.

Winter Storage Tips:

Extreme weather conditions can reduce the life and efficiency of your PostLite™.

• Extreme weather conditions can reduce the life and efficiency of your PostLite™ Ni-Cd or Ni-Mh battery. Remove and store your PostLite™ indoors if

possible during the winter.

• Remove the set screw from the PostLite™. Romove the PostLite™ and take indoors for winter storage. Unscrew the solar cap and remove the battery

for separate storage from the PostLite™.

• If you have glued the base of your PostLite™ a 3-1/4" post or do not wish to remove the entire assembly, you may simply remove the solar top

(Electronics Portion) and store the entire electronic portion of your PostLite indoors. Cover the remaining PostLite™ base with plastic and tie or tape

the plastic to the post to protect from the elements and moisture accumulation.

PostLite™ Quick Reference:

1. The solar panel of the PostLite™ needs exposure to direct

sunlight for several hours during the day to accumulate a

sufficient charge to light through the evening. If the operating

time of the light is short, try moving the PostLite™ to an area

exposed to sunlight for a longer duration during the day.

2. Ensure that the battery is seated properly and is correctly

installed. The negative side of the battery goes against the

spring contact. Periodically inspect the battery connections for

corrosion.

3. If the battery is not charged sufficiently, or if the battery is

damaged, the length of time the PostLite illuminates will be

reduced.

4. If the LED does not work, try another LED color to determine

if it is the result of poor battery performance or a burnt out

LED. If the alternate LED illuminates, the battery may require

replacement. Use only rechargeable Ni-Cd or Ni-Mh batteries.

CAUTION:

Contains Nickel-Cadmium batteries. Expired batteries

must be recycled or disposed of properly.

PostLite™ 1-Year Limited Warranty

DockEdge+ Inc. warrants the PostLite™ to be free from defects in workmanship and material present at the time of shipment from the factory for a period of one year after the date

of purchase by the original purchaser. We agree to correct such defects without charge or at our option replace with a comparable or superior model if the product is returned to the

retailer. To obtain warranty service, you must present a copy of the receipt as proof of purchase. All costs of removing and reinstalling the product are your responsibility. Damage to

any part such as by accident or misuse or improper installation or by affixing any accessories, is not covered by this warranty. There is no other express warranty. The retailer hereby

disclaims any and all warranties, including but not limited to, those of merchantability and fitness for a particular purpose to the extent permitted by law. The duration of any implied

warranty, which cannot be disclaimed, is limited to the time period as specified in the express warranty. Some states do not allow limitation on how long an implied warranty lasts,

so the above limitation may not apply to you. The retailer shall not be liable for incidental, consequential, or special damages arising out of or in connection with the product use or

performance except as may otherwise be accorded by law. Some states do not allow the exclusion of the incidental or consequential damage, so the above exclusion or limitation may

apply to you. This warranty gives specific legal rights, and you may also have other rights, which vary from state to state. This warranty supersedes all prior warranties.

1-5/8" (41mm)

300 New Huntington Rd, Woodbridge, ON, L4H 0R4

1-7/8" (48mm)

SWITCH

COLOR

WHITE

GREEN

BLUE

ORANGE

YELLOW

RED

Battery Removal and Installation:

1. Unscrew off the top cap with solar panel.

2. Unscrew the two screws holding the circuit board in place.

3. Replace battery with AAA (triple A) rechargeable Ni-Cd or Ni-Mh batteries.

4. Reinstall the circuit board and screw the solar cap on snugly to properly seal

your PostLite™.

SOLAR POSTLITE™

2-3/8" (60mm)

3-1/4" (83mm)

I.D. Posts

www.dockedge.com

800-295-3625

Remove the single screw from the

bottom of the PostLite™ lens and

remove the reflector. Place the

lens into the desired position and

secure with a fastener through

the single hole in the bottom.

Insert domed reflector back into

the bottom of the lens and screw

the solar cap back on.

Universal Flat Services

IMPORTANT:

PostLites™ are NOT

intended for use as

navigational lighting.