DOCOL PEDALMATIC Краткое руководство по эксплуатации - Страница 4

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Блок управления DOCOL PEDALMATIC. DOCOL PEDALMATIC 8 страниц. Pedal-operated valve

Печатать страницу
DOCOL PEDALMATIC Краткое руководство по эксплуатации
DIMENSION: see page 5.
INSTALLATION: see pages 6 to 7 - diagrams 1 to 16.
NOTES
* only two screws can be used to fix the valve.
* the flexible hoses can be cut according to the installation.
MAINTENANCE: see instructions below and diagrams at page 7.
PROBLEM
Water does not flow or
flow volume too low
Water flow s
continuously (leak)
Water flow time too long Piston damaged/clogged (diagram 23-part A)
Flow volume too high
Leak under the lever
THIS PACKAGE CONTAINS:
universal fixings and 3 clamps.
SPARE PARTS:Available at Docol Authorized Distributor in your country/ Export Departament + 55 47 3451-1114 or
INSTRUCTION STICKER: stick it at the wall close the spout.
CARE AND CLEANING: only use soft cloth, water and soft soap once a week. Occasionally can be applyed automobiles wax. Do not use
abrasive products.
WARRANTY: Call Docol Authorized Distributor in your country/ Export Departament + 55 47 3451-1114 or [email protected]
For a better perfomance of the hydraulic system, we recommend following a project made by a specialized professional as well as all
relevant standards and the installation standard.
PROBABLE CAUSE
Water supply interrupted
Angle stop valve not opened
Angle stop filter clogged
Aerator clogged
Piston damaged (diagram 23-part A)
Spindle damaged (diagram 23-part B)
Seat damaged (diagram 23-part C)
Angle stop not installed
Angle stop totally opened
Retainer damaged (diagram 23-part D)
Spindle damaged (diagram 23-part B)
1 Pedalmatic valve, 2 flexible hoses, 1 angle stop, 1 instruction manual, 1 instruction sticker, 7 screws, 7
ENGLISH
Check/open supply pipe
Open (diagrams 16)
Clean or replace (diagram 17 - 18)
Clean or replace (diagram 19)
Replace (diagrams 20 - 23)
Replace (diagrams 20 - 23)
Replace (diagrams 20 - 23)
Replace (diagrams 20 - 23)
Install and adjust (diagram 7)
Adjust the flow rate (diagrams 16)
Replace (diagrams 20 - 23)
Replace (diagrams 20 - 23)
SOLUTION
4